En-6
F
AN SPEED AND AIRFLOW
DIRECTION ADJUSTMENT
Press
to select fan speed. Each press changes
fan speed in the following order:
• Two short beeps are heard from the indoor unit when set to AUTO.
• Use higher fan speed to cool/heat the room more powerfully. It is rec
-
ommended to lower the fan speed once the room is cool/warm.
• Use lower fan speed for quiet operation.
Fan speed
Up-down Airflow direction
Press
to select airflow direction. Each press
changes airflow direction in the following order:
(AUTO)
.........The vane is set to the most efficient airflow direction. COOL/
DRY/FAN:horizontal position. HEAT:downward position.
(Manual) .......For efficient air conditioning, select the upward position for
COOL/DRY, and the downward position for HEAT. If the
downward position is selected during COOL/DRY, the vane
automatically moves to the horizontal position after 0.5 to 1
hour to prevent any condensation from dripping.
(Swing) .........The vane moves up and down intermittently.
• Two short beeps are heard from the indoor unit when set to AUTO.
■
To change the horizontal airflow direction.
Move the vertical vane manually before starting operation.
Note:
If the vertical vanes are adjusted while the unit is not operating, be sure to return
the horizontal vanes to the original closed position.
Left-right Airflow direction
E
CONO COOL OPERATION
Swing airflow (change of air flow) makes you feel cooler than stationary airflow.
The set temperature and the airflow direction are automatically changed by the
microprocessor. It is possible to perform cooling operation with keeping comfort.
As a result energy can be saved.
Press
during COOL mode
page 5
to start
ECONO COOL operation.
The unit performs swing operation vertically in various cycle according
to the temperature of the unit. Set temperature is set 2°C higher auto
-
matically.
Press
again to cancel ECONO COOL operation.
• Pressing
also cancels ECONO COOL operation.
T
IMER OPERATION (ON/OFF TIMER)
(AUTO)
(Low)
(Med.)
(High)
(Super High)
(AUTO)
(1)
(2)
(3)
(4)
(5) (SWING)
1
Press
during operation to set the timer.
Each press changes timer mode in the following order:
2
Press
to set the time of timer.
Each press increases or decreases the set time by 1 hour.
Press
until “TIMER RELEASE” is selected to
release timer.
Note:
• ON and OFF timers can not be used in combination.
• If power failure occurs while ON/OFF timer is set, see
page 7
“Auto restart
function”.
(OFF TIMER)
(ON TIMER)
TIMER
RELEASE
JG79Y822H02_en.indd 6
2021/03/25 8:58:16
