En-5
● OPERATING INSTRUCTIONS ●
S
ELECTING OPERATION MODES
Note:
Operation indicator lamp
The operation indicator lamp shows the operation state of the unit.
Indication
Operation state
Room temperature
The unit is operating to reach the set
temperature
About 2°C or more
away from set tem
-
perature
The room temperature is approach-
ing the set temperature
About 1 to 2°C from
set temperature
Demand Response mode
Page 7
—
Lit
Blinking
Not lit
Enjoy cool air at your desired temperature.
Note:
Do not operate COOL mode at very low outside temperatures (less than
-10°C). Water condensed in the unit may drip and wet or damage furni
-
ture, etc.
COOL mode
DRY mode
HEAT mode
FAN mode
Dehumidify your room. The room may be cooled slightly.
Temperature cannot be set during DRY mode.
Enjoy warm air at your desired temperature.
Circulate the air in your room.
Note:
After COOL/DRY mode operation, it is recommended to operate in the
FAN mode to dry inside the indoor unit.
1
Press
to start the operation.
2
Press
to select operation mode. Each press
changes mode in the following order:
3
Press
or
to set the temperature.
Each press raises or lowers the temperature by 1°C.
Press
to stop the operation.
(COOL)
(DRY)
(HEAT)
(FAN)
JG79Y822H02_en.indd 5
2021/03/25 8:58:16
