EN
EN-3
N
AME OF EACH PART
Indoor unit
Outdoor unit
Emergency
COOL
Emergency
HEAT
Stop
P
REPARATION BEFORE OPERATION
Before operation:
Insert the power supply plug into the power outlet and/or turn the breaker on.
Installing the remote controller batteries
Your MITSUBISHI ELECTRIC product is designed and manufactured with high
quality materials and components which can be recycled and/or reused.
This symbol means that electrical and electronic equipment, batteries and
accumulators, at their end-of-life, should be disposed of separately from your
household waste.
If a chemical symbol is printed beneath the symbol (Fig. 1), this chemical sym-
bol means that the battery or accumulator contains a heavy metal at a certain
concentration. This will be indicated as follows:
Hg: mercury (0.0005%), Cd: cadmium (0.002%), Pb: lead (0.004%)
In the European Union there are separate collection systems for used electrical
and electronic products, batteries and accumulators.
Please, dispose of this equipment, batteries and accumulators correctly at your
local community waste collection/recycling centre.
Please, help us to conserve the environment we live in!
Note:
This symbol mark is for EU countries only.
This symbol mark is according to the directive 2012/19/
EU Article 14 Information for users and Annex IX, and/
or to the directive 2006/66/EC Article 20 Information for
end-users and Annex II.
To dispose of this product, consult your dealer.
D
ISPOSAL
Fig. 1
Set temperature : 24°C
Fan speed : Medium
Horizontal vane : Auto
*2
When the remote controller cannot be used...
Emergency operation can be activated by pressing the emergency operation switch (E.O. SW)
on the indoor unit.
Each time the E.O. SW is pressed, the operation changes in the following order:
: Lit
: Not lit
Operation indicator lamp
Remote control
receiving section
Emergency
operation
switch
Horizontal vane
Air inlet
Air fi lter
Front
panel
Air outlet
Fan guard
Heat exchanger
Emergency operation switch
Spec name plate *1
Air cleaning fi lter
(V Blocking Filter,
option)
Air inlet (back and side)
Refrigerant piping
Drainage hose
Air outlet
Drain outlet
Spec name plate *1
Outdoor units may be different in appearance.
*1 The manufacturing year and month are indicated on the spec name plate.
2.
Insert the negative
pole of AAA alkaline
batteries fi rst.
1.
Remove the back lid.
3.
Install the back lid.
4.
Press RESET.
JG79Y819L01_01En.indd 3
2021/07/16 17:09:46
