EN
EN-5
Instructions:
C
LEANING
• Switch off the power supply or turn off the breaker before cleaning.
• Be careful not to touch the metal parts with your hands.
• Do not use benzine, thinner, polishing powder, or insecticide.
• When dirt stands out, wash it with kitchen neutral detergent diluted with luke-
warm water to the specifi ed concentration, then wipe off the detergent with a
damp towel.
• Do not use a scrubbing brush, a hard sponge, or the like.
• Do not soak or rinse the horizontal vane.
• Do not use water hotter than 50°C.
• Do not expose parts to direct sunlight, heat, or fi re to dry.
• Do not apply excessive force on the fan as it may cause cracks or breakage.
This information is based on
REGULATION (EU) No 528/2012
MODEL NAME
Treated Article
(Parts name)
Active Substances
(CAS No.)
Property
Instruction for Use
(Safe handling information)
MSZ-DW25/35/50VF
FILTER
Silver sodium hydrogen zirconium
phosphate
(265647-11-8)
2-octyl-2H-isothiazol-3-one (OIT)
(26530-20-1)
Antibacterial
Antimold
• Use this product in line with the instruction
manual indications and for the intended pur-
pose only.
• Do not put into mouth. Keep away from chil-
dren.
MAC-2470FT-E
FILTER
Dimethyloctadecyl[3-
(trimethoxysilyl)propyl]ammonium
chloride
(27668-52-6)
Antivirus
Antibacterial
Antimold
• Use this product in line with the instruction
manual indications and for the intended pur-
pose only.
• Do not put into mouth. Keep away from chil-
dren.
Air fi lter (Air purifying fi lter)
•
Clean every 2 weeks
• Remove dirt by a vacuum cleaner, or rinse with water.
• After washing with water, dry it well in shade.
Air cleaning fi lter
(V Blocking Filter, option)
Every 3 months:
• Remove dirt by a vacuum cleaner.
When dirt cannot be removed by vacuum cleaning:
•
Soak the fi lter and its frame in lukewarm water before rinsing it.
•
After washing, dry it well in shade. Install all tabs of the air fi lter.
Every year:
• Replace it with a new air cleaning fi lter
for best performance.
• Parts Number
MAC-2470FT-E
Pull to remove from the air fi lter
Important
•
Clean the fi lters regularly for best performance and to
reduce power consumption.
•
Dirty fi lters cause condensation in the air conditioner
which will contribute to the growth of fungi such as
mold. It is therefore recommended to clean air fi lters
every 2 weeks.
1. Lift the front panel until a “click” is heard.
2. Hold the hinges and pull to remove as shown in the illustration
above
.
• Wipe with a soft dry cloth or rinse it with water.
• Do not soak it in water for more than two hours.
• Dry it well in shade before installing it.
3. Install the front panel by following the removal pro-
cedure in reverse. Close the front panel securely
and press the positions indicated by the arrows.
Front panel
Hole
Hinge
JG79Y819L01_01En.indd 5
2021/07/16 17:09:47
