OPERATING PROCEDURE
PHOTOS/FIGURES
10.
Removing the drain pan
(1) Remove the electrical box. (See photo 3 and refer to 7.)
(2) Remove the bell mouth (tapping screw 4×10 : 2 screws).
(See Photo 6.)
(3) Remove the drain pan (screw M5×10: 4 screws).
Photo 13
11.
Removing the pipe temperature thermistor/liquid (TH2)
and the condenser/evaporator temperature thermistor
(TH5)
(1) Remove the drain pan (Refer to procedure 10.) and loos-
en the 2 clamps of the coil plate. (See Photo 10.)
(2) Remove the coil plate (tapping screw 4×10: 2 screws).
(3) Disconnect the pipe temperature thermistor/liquid (TH2)
and the condenser/evaporator temperature thermistor
(TH5) from the holder.
Photo 14
Drain pan
Drain pan
fixing screws
Drain pan
fixing screws
Condenser/evaporator
temperature thermistor (TH5)
Pipe temperature/liquid
thermistor (TH2)
TCH070A
46
47
TCH070A.indd 46
TCH070A.indd 46
7/2/2565 16:46:55
7/2/2565 16:46:55