4
●
Remote controller
●
Operation buttons
●
Once the operation of the unit is
set, subsequent operations can
only be performed by pressing
the ON/OFF button repeately.
FILTER
CHECK MODE
TEST RUN
050
w
w
button
This switches between
continuous operation and
the timer operation.
q
q
button
This sets of switches the
current time. start time and
stop time.
a
a
button
Press this button to switch
the cooler electronic dry
(dehumidify) automatic and
heater modes.
i
i
TEMP button
This sets the room tem-
parature. The temparature
setting can be performed in
1°C units
Setting range
Cooler 19°C to 30°C
Heater 17°C to 28°C
This model name of the
remote controller is indicat-
ed.
ON/OFF button
This switches between the
operation and stop modes
each time it is pressed. The
lamp on this butoon lights
during operation.
(This button does not oper-
ate in this model)
FILTER button
This resets the filter service
indication display.
(This button does not oper-
ate in this model)
l
l
button
This sets the ventilation fan
speed.
k
k
button
This switches the horizon-
tal fan motion ON and OFF.
(This button does not oper-
ate in this model)
CHECK-TEST RUN button
Only press this button to
perform
an
inspection
check or test operation. Do
not use it for nomal opera-
tion.
button
This adjusts the vertical
angle of the ventilation.
