background image

2

Contents

1. Safety Precautions

► Before installing the unit, make sure you read all the “Safety Precautions”.

► The “Safety Precautions” provide very important points regarding safety. Make sure you follow them.

► Please report to or take consent by the supply authority before connection to the system.

MEANINGS OF SYMBOLS ON THE UNIT

WARNING

(Risk of fire)

This symbol is only for R32 refrigerant. The type of the refrigerant used is written on the nameplate on the outdoor unit.

R32 refrigerant is flammable. If the refrigerant leaks, or comes in contact with fire or parts that generate heat, it may create 

harmful gas and pose a risk of fire.

Read the OPERATION MANUAL carefully before operation.

Service personnel are required to carefully read the OPERATION MANUAL and INSTALLATION MANUAL before operation.

Further information is available in the OPERATION MANUAL, INSTALLATION MANUAL, and the like.

Symbols used in the text

 

Warning:

Describes precautions that should be observed to prevent danger 

of injury or death to the user.

 Caution:

Describes precautions that should be observed to prevent damage 

to the unit.

Symbols used in the illustrations

  : Indicates a part which must be grounded.

 Warning:

•  These appliances are not accessible to the general public. 

•  The unit must not be installed by the user. Ask the dealer or an 

authorized company to install the unit. If the unit is installed 

improperly, water leakage, electric shock or fire may result.

•  Do not stand on, or place any items on the unit. 

•  Do not splash water over the unit and do not touch the unit with 

wet hands. An electric shock may result.

•  Do not spray combustible gas close to the unit. Fire may result.

•  Do not place a gas heater or any other open-flame appliance 

where it will be exposed to the air discharged from the unit. 

Incomplete combustion may result.

•  Do not remove the front panel or the fan guard from the outdoor 

unit when it is running. 

•  When you notice exceptionally abnormal noise or vibration, stop 

operation, turn off the power switch, and contact your dealer.

•  Never insert fingers, sticks etc. into the intakes or outlets.

•  If you detect odd smells, stop using the unit, turn off the power 

switch and consult your dealer. Otherwise, a breakdown, electric 

shock or fire may result.

•  This air conditioner is NOT intended for use by children or infirm 

persons without supervision.

•  Young children must be supervised to ensure that they do not 

play with the air conditioner.

• 

If the refrigeration gas blows out or leaks, stop the operation of the air 

conditioner, thoroughly ventilate the room, and contact your dealer.

1. Safety Precautions .................................................................2

2. Parts Names ...........................................................................3

3. Operation ................................................................................

6

4. Timer.......................................................................................

9

5.   Emergency Operation for Wireless Remote-controller 

 

(option) ...................................................................................

9

6. Care and Cleaning..................................................................

9

7. Trouble Shooting ..................................................................

10

8. Specifications .......................................................................

11

Note:

The phrase “Wired remote controller” in this operation manual refers only to the PAR-33MAA. If you need any information for the other remote controller, 

please refer to the instruction book included with the remote controller.

•  When installing, relocating, or servicing the air conditioner, 

use only the specified refrigerant written on the outdoor unit to 

charge the refrigerant lines. Do not mix the refrigerant with any 

other refrigerant, and do not allow air to remain in the lines.

-  If air is mixed with the refrigerant, then it may cause abnormal high 

pressure in the refrigerant lines, resulting in an explosion and other 

hazards.

-  The use of any refrigerant other than that specified for the 

system will cause mechanical failure, system malfunction, or 

unit breakdown. In the worst case, this could lead to a serious 

impediment to securing product safety.

-  It may also be in violation of applicable laws.

-  MITSUBISHI ELECTRIC CORPORATION cannot be held 

responsible for malfunctions or accidents resulting from the use of 

the wrong type of refrigerant.

•  This indoor unit should be installed in a room which is equal 

to or larger than the floor space specified in the outdoor unit 

installation manual. Refer to the outdoor unit installation manual.

•  Only use means recommended by the manufacturer to accelerate 

the defrosting process or to clean.

•  This indoor unit shall be stored in a room that has no 

continuously-operating ignition device such as open flame, gas 

appliance, or electrical heater.

•  Do not pierce a hole in or burn this indoor unit or refrigerant 

lines.

•  Be aware that the refrigerant may be odour-free.

 Caution:

•  Do not use any sharp object to push the buttons, as this may 

damage the remote controller.

• 

Never block or cover the indoor or outdoor unit’s intakes or outlets.

 

Disposing of the unit

When you need to dispose of the unit, consult your dealer.

Summary of Contents for Mr. SLIM PEAD-M100JAA













Reviews: