Mitsubishi Electric Mr.SERVICE PUHZ-HRP100VHA2, Technical Manual

Page: 70 / 96

70
( )
Limit TEMP. = OFF
Select mode = OFF Select mode = ON
OFF
Present setting:Select mode=ON Present setting:Select mode=OFF
Limit TEMP. = ON
Present setting:Limit TEMP. = ON Present setting:Limit TEMP. = OFF
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
Lower limit
Upper limit
Lower limit
Upper limit
Lower limit
Upper limit
OFF No1
No2
Change
Language
Function
selection
Normal display
[Function selection flow chart]
Setting language(English)
OFF … Operation lock setting is not used.(Initial setting)
No1 … Operation lock setting for all buttons except ON/OFF is active.
No2 … Operation lock setting for all button is active.
English
Italian
Germany Spanish Russian
Swedish French
Hold down the ( ) button and press the ( ) button for 2 seconds.
Hold down the ( ) button and press the ( ) button for 2 seconds.
ON
OFF
*
*
*
* These are timer mode.
OFF
ON
ON
OFF
°C
°F
OFF
ON
Mode
selection
Display mode
setting
MAIN ···· The remote controller will be the main controller.(Initial setting)
SUB ···· The remote controller will be the sub controller.
TIMER MODE OFF : Timer mode can not used.(Initial setting)
WEEKLY TIMER : Weekly timer can be used.
AUTO OFF TIMER : Auto off timer can be used.
SIMPLE TIMER : Simple timer can be used.
ON ···· The crock function can be used.(Initial setting)
OFF ···· The clock function can not be used.
OFF ···· The set contact numbers are not displayed in case of error.
(Initial setting)
ON ···· The set contact numbers are displayed in case of error.
ON ···· The offset function of the water temperature can be used.
(Initial setting)
OFF ···· The offset function of the water temperature can not be used.
°C ···· The temperature unit “°C” is used.(Initial setting)
°F ···· The temperature unit “ °F” is used.
OFF ···· Water temperature is displayed.(Initial setting)
ON ···· Water temperature is not displayed.
Select mode = OFF (Initial setting)
• All operation modes are available in
this mode.
Select mode = ON
• Selected mode is skipped.
OFF ···· Skipped
ON ···· Available
Limit TEMP. = OFF (Initial setting)
• Water temp. setting range : standard
Limit TEMP. = ON
• Water temp. setting range : limited
Lower limit ···· sets the lowest water
temperature.
Upper limit ···· sets the highest water
temperature.
* “LIMIT TEMP. HOT WATER” mode
also limits the setting range in the
“Heating” mode.
ON/OFF TEMP.
Dot display