21
To clean (rinse) the ice tray
Ice storage bin
Remove ice
MODE
When the automatic ice maker will
not be used for a long period of time
* Follow these instructions for
transportation of the refrigerator as well.
MODE
Put the water tank back
to its original position.
Maintaining the A
utomatic Ice Mak
er
1
Remove ice from the ice storage box and
close the Ice Making compartment door.
2
Fill the water tank with water and
set it in place.
3
Press
button on the control
panel for about 5 seconds (until a
“beep” sound is heard).
■
The display of the ice making compartment will
blink (for about 1 minute ).
(The ice tray will be cleaned by the water from
the water tank.)
■
A buzzer will sound when cleaning is complete. After
blinking stops, you may hear a knocking sound. This
is not a malfunction. (This sound indicates that the
operation of coolant valve is being checked.)
4
Repeat step 3 2 to 3 times.
5
Remove the ice storage bin and
discard the water and ice.
Ice making
compartment
Water tank
Ice storage bin
Note
Do not use kitchen detergent, benzene,
bleach or other cleaning products to clean
the light-type bacteria removing filter.
●
The products above give ice odours.
●
Be sure to read all instructions for detergents, bleach
and other cleaning products you use to clean parts.
Discard all the ice and water from the ice tray
in the ice storage bin to empty the ice tray.
1
Remove the water tank and close
the ice making
compartment
door.
2
Press
button on the control
panel for about 5 seconds (until a
“beep” sound is heard).
■
The display of the ice making compartment will
blink (for about 1 minute ).
(The ice tray will be cleaned by the water from
the water tank.)
■
A buzzer will sound when cleaning is complete.
After blinking stops, you may hear a knocking
sound. This is not a malfunction. (This sound
indicates that the operation of coolant valve is
being checked).
3
Remove the ice storage bin and
discard the water and ice.
4
Set the ice making compartment to
.
■
When the ice maker is set to
, no need to change
the temperature control setting.
page 19
5
When the water tank (water pump, pipe,
light-type bacteria removing filter), water
supply pipe, ice storage bin and
soundproof mat with water. Dry carefully
and replace parts.
●
To restart the ice
maker, set the
temperature control
of ice making
compartment to
.
page 9
Note
When the setting of Ice Making compartment is
“REF (Refrigerator)”, this function is impossible.
PU8>M;9=g:85;96x>=
06.5.24, 5:25 PM
21
Summary of Contents for MR-G50J
Page 30: ...MEMO ...
Page 31: ...MEMO ...
