Mitsubishi Electric MJ-E26CX-H Instruction Manual Download Page 4

Page: 4 / 26

Meanings of the graphic symbols used in this manual and on

the unit are explained below.

Precautions

Forbidden

Keep away
from ﬁ re

Do not
subject to
water

Do not
disassemble

Always
follow the
instructions

The following diagrams indicate circumstances
where danger can result from mishandling the unit.

WARNING

CAUTION

Mishandling may result in
fatal or serious injuries.

Mishandling may result in
minor injuries or damage to
your home or property, etc.

Do not damage or modify the power
cord or plug. Do not use power sockets
in which the plug fi ts loosely.

Do not modify, bundle, twist, bend or heat the
power cord. Do not place under objects or
use with the end close to the plug bent.
(Keep pets from biting the cord.)

The cord may be damaged

resulting in fi re,

electric shock or heat generation

Do not plug many power cords
into one power socket.

This may

result in fi re, electric shock or

malfunctions

Do not start/stop the unit by
plugging/unplugging the power
cord.

This may

result in fi re and/or electric shock

Do not put the unit near heat-
generating devices (such as stoves,
fan heaters, etc.).

The plastic parts may melt and

cause fi re

Do not put your fi ngers
or any long object, into
the air intake/outlet.
Do not touch the swing
louvre.

The internal fan rotates at high speeds,
and such actions may

result in injury or

malfunctions.

Do not attempt to repair,
disassemble, or modify the unit.

This may

result in fi re and/or electric shock

Refer servicing to your dealer or Mitsubishi Electric
Service Centre.

Exclusively use 220 to 240 V AC
power sockets for the power supply.

Failing to do so may

result in a fi re and/or

electric shock

∗

Use an extension cord by itself.

Wipe dust off the power plug and
insert the plug fi rmly.

If the plug is not fully inserted into the socket,
dust may gather on the connectors which may

cause fi re and/or electric shock

Should abnormal symptoms occur
(a burning smell, etc.), switch off
the unit and unplug it from the
socket.

Continuing to operate the unit may

result in

fi re, electric shock, or malfunctions

Contact your dealer or Mitsubishi Electric Service
Centre for consultation.

Remove water that has collected in
the tank.

Accidentally drinking the water or using it for
other purposes may

cause illness and/or

unforeseen accidents

WARNING

e̲mj̲e26cx̲h.indb 4

2009/10/26 17:22:19

Summary of Contents for MJ-E26CX-H



























Search results

Summary of Contents for MJ-E26CX-H

Reviews:

Related manuals for MJ-E26CX-H

Brands by name

Popular brands

Mitsubishi Electric MJ-E26CX-H, Instruction Manual

Search results

Summary of Contents for MJ-E26CX-H

Reviews:

Related manuals for MJ-E26CX-H

Brands by name

Popular brands