24
24
Maintenance (Continued)
Once every three months
Silver ion filter
Soak the filter in water once every three months.
1
Remove the front panel and pre-
filter.
2
Remove the silver ion filter.
3
Soak the silver ion filter in
water.
¡
Stains may remain on the filter, but should not
affect performance.
¡
The filter can be soaked for a total of eight
times.
After that, replace with a new filter.
4
Dry the silver ion filter.
Dry well.
5
Fit the silver ion filter.
With the strips facing up, set the
silver ion filter inside the tabs on the
pre-filter.
6
Attach the pre-filter and front
panel.
Soak in cool to
lukewarm water for
30 minutes.
Do not use detergent or hot water.
Also, do not brush or rub while
soaking as this may damage the filter.
Do not hang with pegs as this may
damage the filter.
Do not use the filter while wet.
1
Remove by holding
the bottom.
1
Attach by holding
the tabs.
2
Hook the top edge
to the top part of the
unit and push the
bottom in.
2
Remove by
holding the
tabs.
Performance is
unaffected even if the
metal fins inside the main
unit are slightly bent.
Front panel
Silver ion filter
Tabs (6)
Pre-filter
Pre-filter
e_mj_e22wx_c(20_28)_e33.qx 9/27/06 9:59 AM Page 24
