Mitsubishi Electric MJ-E16VX-A1 Instruction Manual Download

Page: 9 / 28

Bef

e Using the Unit

The

indicator comes on if the

room temperature drops below

15°C.

Activating Low Temp mode is

recommended.

Tank full lamp

This lights up to warn that the

water tank is full.

Power lamp

Lights when unit is ON.

Power button

Use this to switch the unit

ON and OFF.

You can select from 7 operating modes.

Low Temperature

Indicator

DEFROST Indicator

Airflow (dehumidifying) will stop and the

frost that has accumulated inside will be

melted and dropped into the tank when

the indicator is on.

Please wait a moment as operation will

resume in around 5 minutes.

While in DEFROST mode, airflow

(dehumidifying) and the louvre will

stop. The sounds coming from the unit

will also change.

DEFROST will start automatically when

room temperature drops below 15°C

(This may be as often as once every 40

minutes).

Names and Functions of Parts (Cont.)

Mildew guard elite lamp

Flashes when drying inside in progress.

Mildew guard elite button

Activate/deactivates drying inside.

Air purifier lamp

Lights during air purifier-only operation.

Air purifier button

Switches to air purifier-only operation.

Information display

Indicates room and unit

condition.

High Humidity

Warning

The

indicator flashes

when the unit is OFF and

the humidity in the room

exceeds 75%. Activating

the dehumidifier is

recommended when the

indicator is flashing.

If the High humidity warning

is not used, remove the

power plug from the power

socket.



EASY

DEHUMIDIFYING



LAUNDRY



LOW



MILDEW GUARD



LOW TEMP



AUTO



AIR PURIFIER

All modes include

dehumidifier and air purifier

functions.

Air purifier only operation.

The dehumidifier function is

disabled.

e_mj_e16vx_a1.indb 9

2016/06/27 14:37:59

Summary of Contents for MJ-E16VX-A1





























Search results

Summary of Contents for MJ-E16VX-A1

Reviews:

Related manuals for MJ-E16VX-A1

Brands by name

Popular brands

Mitsubishi Electric MJ-E16VX-A1, Instruction Manual

Search results

Summary of Contents for MJ-E16VX-A1

Reviews:

Related manuals for MJ-E16VX-A1

Brands by name

Popular brands