16
The louvre can be made to swing. Select from the 4 possible settings to suit the purpose.
Press
Swing Louvre Function
(how to read the swing monitor)
Starts swing operation.
The swing monitor is displayed.
Objective
Recommended swing setting
Explanation of the swing modes
To stop the
louvre at the
desired angle
Stop swing
operation
z
The louvre stops in a vertical position.
z
The swing monitor turns off.
To change the louvre to a desired angle, wait until the
louvre stops, then adjust by hand.
To cover the
entire room
WIDE
The louvre swings from the UPWARD position through to
the REAR position.
For drying
clothes, etc.
UPWARD
Swing speed is automatically controlled to send air at
washing from all angles.
For directing air
into a closet
REAR
The louvre moves slowly through
the last 30° of the swing, as the
time taken to traverse the rear arc
is shorter than that for the upward
arc when moving at a constant
speed.
Infor
mation
z
The level of noise emitted from the unit varies according to the angle of the air-flow.
z
The louvre may stop up to a maximum of 8 seconds to correct its position, after which it will start moving again.
z
If the louvre is knocked out of the desired angle, readjust by following the above steps.
Not
e
Stop the louvre in the vertical position when using the unit against a wall. Blowing air at the wall may cause staining.
The swing operation stops when the power
cord is unplugged.
This indicates the range of louvre swing.
(The louvre and monitor do not move in
synchronization.)
With each press
of the button
Stop swing
operation
WIDE
UPWARD
REAR
e_mj_e16vx_a1.indb 16
2016/06/27 14:38:01
