4. PARAMETERS
4 - 4
No./symbol/
name
Setting
digit
Function
Initial
value
[unit]
PN14
*IPAD4
IP address
setting 4
Set the 4th octet of the IP address in decimal.
Set the IP address assigned by the network administrator.
When SLMP command (IPAdressSet) is received, the setting of the fourth octet will
be written to this parameter.
Refer to table 5.1 for the relation between the setting value of the identification
number setting rotary switch and the parameter setting value.
Setting range: 0 to 255
0
PN15
*SNMK1
Subnet mask
setting 1
Set the 1st octet of the subnet mask in decimal.
Set the subnet mask assigned by the network administrator.
Setting range: 0 to 255
255
PN16
*SNMK2
Subnet mask
setting 2
Set the 2nd octet of the subnet mask in decimal.
Set the subnet mask assigned by the network administrator.
Setting range: 0 to 255
255
PN17
*SNMK3
Subnet mask
setting 3
Set the 3rd octet of the subnet mask in decimal.
Set the subnet mask assigned by the network administrator.
Setting range: 0 to 255
255
PN18
*SNMK4
Subnet mask
setting 4
Set the 4th octet of the subnet mask in decimal.
Set the subnet mask assigned by the network administrator.
Setting range: 0 to 255
0
PN19
*DGW1
Default
gateway
setting 1
Set the 1st octet of the default gateway in decimal.
Set the default gateway assigned by the network administrator.
Setting range: 0 to 255
192
PN20
*DGW2
Default
gateway
setting 2
Set the 2nd octet of the default gateway in decimal.
Set the default gateway assigned by the network administrator.
Setting range: 0 to 255
168
PN21
*DGW3
Default
gateway
setting 3
Set the 3rd octet of the default gateway in decimal.
Set the default gateway assigned by the network administrator.
The default gateway can also be changed simultaneously by the SLMP command
(IPAdressSet).
Setting range: 0 to 255
3
PN22
*DGW4
Default
gateway
setting 4
Set the 4th octet of the default gateway in decimal.
Set the default gateway assigned by the network administrator.
The default gateway can also be changed simultaneously by the SLMP command
(IPAdressSet).
Setting range: 0 to 255
1
PN23
*KAA
KeepAlive
time
Set the time interval between the transmissions of the alive check message (Keep
Alive ACK) for TCP communication.
If no response to the alive check message is received, the connection is forcibly
closed after the time (setting value × 8 times) has elapsed. In the initial setting, the
connection is closed after 8 hours (3600 [s] × 8 times = 28800 [s]) have elapsed.
Setting range: 1 to 7200
3600
[s]
PN24
*IPAF1
IP address
filter 1
Set the 1st octet of the IP address of the network device allowed to be connected in
decimal.
When [Pr. PN24] to [Pr. PN27] are all set to "0", the function is disabled.
Setting range: 0 to 255
0
Summary of Contents for MELSERVO-JE MR-JE-C
Page 9: ...A 8 MEMO ...
Page 83: ...MEMO ...
