Installation
Mitsubishi Electric, MA00776
2-1
2
Installation
2.1 Space Requirements
– Installation plate thickness: 1.5 - 9.0 mm (0.06 - 0.35 inch)
– Space requirements when installing the operator terminal:
Caution
The openings on the enclosure are for air convection. Do not cover these openings.
2.2 Installation Process
1. Unpack and check the delivery. If damage is found, notify the supplier
.
Note:
Place the operator terminal on a stable surface during installation.
Dropping it or letting it fall may cause damage.
2. Place the panel cut out where the operator terminal is to be situated, draw along
the outer sides of the holes and cut according to the markings. If access to the
text strip is needed, add extra space in the lower left corner.
50 mm
50 mm
100 mm
285 mm
177 mm
56 mm
100 mm
100 mm
(6.97 inch)
(2.0 inch)
(4.0 inch)
(4.0 inch)
(2.0 inch)
(4.0 inch)
(2.20 inch)
(11.22 inch)
x 6
Panel cut out 245.5 x 138.5 mm
(9.67 x 5.45 inch)
5.0 mm
18.0 mm
For text strip
(0.20 inch)
(0.71 inch)
Summary of Contents for Mac E Series
