1
2
3
4
14
Direction of
airflow
12
Maintenance
Monthly cleaning
For the best performance from your unit, clean approximately once a month.
Both sides
Using the soft
nozzle brush of a
vacuum cleaner,
Cleaning the sensors
Cleaning the HEPA filter
Odor sensor (control panel)
Remove dust using
the nozzle of a
vacuum cleaner.
Remove surrounding dust
using the nozzle brush of a
vacuum cleaner.
Dust sensor surroundings
Cleaning the main unit
Intake grill
Remove dust
using a nozzle
brush of a
vacuum cleaner.
For stubborn dirt, remove
the intake grill, and wash
with a soft sponge.
Thoroughly dry before
replacing.
Main unit
Dry-wipe with
a soft cloth.
For stubborn dirt,
wipe with a cloth
dampened with
water.
Press the grill release buttons on
each side, and remove the intake grill.
Remove the HEPA filter and clean.
Replace the HEPA filter.
remove dust by taking care not
to tear the HEPA filter surface.
Do not wash. The filter cannot
be reused if washed or after
becoming wet.
8
Replace the intake grill.
Hook the five tabs on the upper
side of the intake grill, and press
in the lower side until the release
buttons snap securely.
Replace the HEPA filter with the
logo facing you and
arrows pointing away from you.
Cleaning Sensors, the HEPA
filter, and main unit
Cleaning the Plasma unit
Monthly
Yearly
Replacing the filters
WARNING
Before cleaning the unit,
turn off the power and
remove the power plug.
Electrical shock and/or injury
may occur as a result.
