Please replace the HEPA filter and the activated charcoal
filter with new filters when the color on the surface of the
HEPA filter matches the color indicated above.
Available from Mitsubishi Electric
www.plasmapure.com
REPLACE FILTERS
Reset Switch
1
2
3
4
5
6
Reset switch
Beep
14
Use a ball point pen,
or a similar pointed
object, and press
until a beep is heard.
Maintenance (continued)
Replacing the filters
The filter replacement lamp notifies you of the replacement period of the HEPA filter and the activated charcoal filter.
Replace both the HEPA filter and the activated charcoal filter at the same time.
Replacement period
Color of household dust
Color of cigarette ingredients
●
The service life of the filters varies depending
on the usage environment, and conditions.
●
The HEPA filter and the activated charcoal filter
cannot be reused. Always replace old filters
with new filters.
●
When smoking large amount of cigarettes, odor
may adhere to the filter and main unit. In this
case, clean the main unit, and replace the filters.
Separately sold part:
Replacement filter set
(HEPA filter/activated charcoal filter)
Model
MAPR-E837HFT
Code no. 5D4 C06
To order parts, contact your dealer of purchase
or Mitsubishi Electric @ www.plasmapure.com
Remove the intake grill and the
HEPA filter.
Remove the Plasma unit.
Replace the activated charcoal
filter.
Replace the Plasma unit and
mount a new HEPA filter.
Insert the power plug and press
the Reset Switch.
Set vertically.
(There is no front or back.)
Replace the intake grill.
12~13
Although the replacement period depends on
the usage environment and conditions, the
lamp will light after approximately 5 years
when using the unit on constant MIN fan
speed.
(In the case of MAX, the lamp will light in
approximately 1/4 the time.)
●
When the filter replacement lamp illuminates
●
When the HEPA filter becomes dirty and the
color is about the same as that indicated on
the label
