6. NetCommand
55
Key Name in
Learning Screen
Special Operation Description and Setup
How to Use
Power On
Manual Power On/Off
Use for devices that have only one
POWER
key.
1. Press
INPUT
to display the
Input Selection
menu.
2. Press to highlight the icon for the
device to be powered on or off.
3. With the
Input Selection
menu still dis-
played, press
POWER
to send the power signal;
you may need to press
POWER
twice.
Note:
If you press
POWER
without the
Input
Selection
displayed, the TV will turn off.
4. Press
ENTER
to switch the TV to the device.
Power On
Power Off
Automatic Power On/Off
This feature is only for devices that have separate
POWER ON
and
POWER OFF
keys on their original remote
controls. If your device does not have a separate
POWER OFF
key, do not use the
Power Off
learn-
ing position; use only the Manual Power ON/OFF
method described above.
In the NetCommand
Learn
screen:
a. “Learn” the
Power On
command in the
Power
On
learning position.
b. “Learn” the
Power Off
command in the
Power Off
learning position.
•
To Power On the Device
1. Press
INPUT
to display the
Input Selection
menu.
2. Press to highlight the icon for
the device to be powered on or off.
3. Press
ENTER
to switch the TV to the device
and NetCommand will send the
Power
On
command to the device.
•
To Power Off the Device
When you turn the TV off, the TV sends all
learned
Power Off
commands to all devices.
Menu
Displaying the Menu for a Device
1. While watching a device, press
INPUT
to display
the
Input Selection
menu with the device
icon highlighted.
2. Press
MENU
to send the menu signal to the
device. The
Input Selection
menu will auto-
matically clear from the screen.
Special Operation Methods
Operating NetCommand-Controlled Devices
To Control an A/V Receiver
Switching Audio to and from the A/V Receiver
1. Press
AUDIO.
2. Press to show the
Speakers
option.
3. Press to select either
AV Receiver
or
TV
.
Controlling A/V Receiver Power
1. Press
AUDIO.
2. Press to show the
Speakers
option.
3. Press to select
AV Receiver
.
4. Point the remote control at the
TV
(not the A/V
receiver) and press
POWER
to power the A/V receiver
on or off
Controlling Other A/V Receiver Functions
With the A/V receiver powered on and selected, the
TV’s remote operates the volume and mute functions.
Also, when you switch to a device in the
Input Selec-
tion
menu, the A/V receiver automatically switches to
the correct audio input for the device.
To Control Most Device Types
As an example of NetCommand control, if you are
watching your cable box and you wish to tune to the
next channel higher, press
CH/PAGE
. NetCommand
then sends the “learned” channel-up control signal to
the cable box.
1. With an IR emitter properly positioned in front of the
device, use the
Inputs
>
Learn
screen to perform
NetCommand setup for the device.
2. When you wish to use the device, press
INPUT
to
display the
Input Selection
menu.
3. Press to highlight the icon for the device.
4. Press
ENTER
to switch the TV to the device.
Note:
if you have set up automatic input switching
for the A/V receiver, the A/V receiver will automatically
switch to the correct input for the device.
5. To operate the device using the
TV’s
remote
control, set the slide switch to the
TV
position.
6. Point the remote control at the
TV
(not the device)
and press the key for the desired function.
