─ 41 ─
(5) Terminal block parts
[1] Remove the control box cover. → See (2) [1].
[2] Check that LED4 on the control circuit board is OFF,
and then disconnect the connectors (indicated by )
from the control circuit board.
[3] Remove the screw (one PPT screw 4×25, indicated by
).
Terminal block
[4] Remove the screws (three PT screws 4×8, indicated by ), and remove the sub control base.
CN7
CN19
CN5
CN14
Control circuit board
Control base
Control base
Side plate
Sub control base
Sub control base
[5] Disconnect the connectors (indicated by ) from the
power circuit board and the reactor, and remove the
terminal brock with the lead wires.
Power circuit board
TAB1
TAB2
Reactor
Terminal brock
