─ 43 ─
[5] Remove the screws (two PT screws, indicated by ),
and slide the power circuit board to remove it.
Power circuit board
[6] Remove the sub control base. → See (5) [4].
[7] Disconnect the connectors (indicated by ) from the
reactor.
[8] Remove the screws (two PT screws 4×8, indicated by
), and remove the reactor.
Reactor
• Reassemble the unit in the reverse order of disassembly.
• After reassembly, always make a test run to make sure
that the unit operates properly.
When reassembling
