Mitsubishi Electric LE7-40GU, Instruction Manual, Page: 44 / 154

42
4 SLMP COMMUNICATION
4.2 Communication Setting
Setting with GT Designer3 (GOT2000)
1.
Obtain the "Screen package data for SLMP communication" from your local Mitsubishi Electric representative.
2.
Open the "Screen package data for SLMP communication" in GT Designer3 (GOT2000) and change the settings of
[Common] - [Controller Setting] - [CH2] as follows.
For details on the communication settings in GT Designer3 (GOT2000), refer to the following.

GOT2000 Series Connection Manual (Microcomputers, MODBUS/Fieldbus Products, Peripherals)
<Controller Setting>
<Detail setting>
<Ethernet Controller Setting>
3.
Transfer the "Screen package data for SLMP communication" to LE7-40GU with GT Designer3 (GOT2000).
For more information on data transfer, refer to the following.

Page 14 COMMUNICATION WITH A PERSONAL COMPUTER (GT DESIGNER3, DATA TRANSFER TOOL)
4.
Select "SLMP" on the "Ethernet communication selection" screen of the LE7-40GU screen.
5.
Restart LE7-40GU.
Setting name Setting detail
Manufacturer CLPA
Controller Type SLMP
I/F Ethernet:Multi
Driver Ethernet(SLMP), Gateway
Property Value
GOT Net No. 1
GOT Station 2 to 7
GOT Communication Port No. 5031
Retry(Times) 3
Startup Time(Sec) 3
Timeout Time(Sec) 3
Delay Time(ms) 0
Message Format 4E frame
Communication deta code Binary code
Device read points(Points) 960
Device write points(Points) 960
Device read random points(Points) 0
Device write random point(Points) 0
Setting name Setting value
Net No. 1
Station 1
Unit tType SLMP
IP Address 192.168.3.250
Port No. 49152
Communication UDP