background image

For Your Records

Record the model number, serial number, and 
purchase date of your TV.  The model and serial 
numbers are on the back of the TV.  Refer to this 
page when requesting assistance with the TV.

MODEL NUMBER   

SERIAL NUMBER   

PURCHASE DATE  

RETAILER NAME   

LOCATION  

 

 

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC 
SHOCK, DO NOT REMOVE COVER (OR BACK).  
NO USER SERVICEABLE PARTS INSIDE.  
REFER SERVICING TO QUALIFIED SERVICE 
PERSONNEL.

The lightning flash with arrowhead 
symbol within an equilateral triangle is 
intended to alert the user of the pres-
ence of uninsulated “dangerous voltage” 
within the product’s enclosure that may 
be of sufficient magnitude to constitute 
a risk of electric shock to persons.

The exclamation point within an equilateral 
triangle is intended to alert the user to 
the presence of important operating and 
maintenance (servicing) instructions in the 
literature accompanying the product.

TV WEIGHT:

  This TV is heavy!  Exercise extreme care 

when lifting or moving it.  Lift or move the TV with a 
minimum of two adults.  To prevent damage to the TV, 
avoid jarring or moving it while it is turned on.  Always 
power off your TV, unplug the power cord, and discon-
nect all cables before moving it.

WARNING:

  To reduce the risk of fire or electric shock, 

do not expose this apparatus to rain or moisture.

WARNING

:  This product contains chemicals known 

to the State of California to cause cancer and/or birth 
defects or other reproductive harm. 

MAINS DISCONNECTION:

  The mains plug is used 

as the disconnect device.  The disconnect device shall 
remain readily operable.

FCC Declaration of Conformity

Product:

LCD Flat Panel HDTV

Models:

LDTV-146
LDTV-152

Responsible
Party:

Mitsubishi Digital Electronics 

America, Inc.

9351 Jeronimo Road
Irvine, CA 92618-1904

Telephone:

(888) 307-0349

This device complies with Part 15 of the FCC Rules.  

Operation is subject to the following two conditions:
(1)  This device may not cause harmful interference, 

and

(2)  this device must accept any interference 

received, including interference that may cause 
undesired operation.

Note:

 This equipment has been tested and found 

to comply with the limits for a Class B digital device, 
pursuant to part 15 of the FCC Rules. These limits 
are designed to provide reasonable protection 
against harmful interference in a residential instal-
lation. This equipment generates, uses and can 
radiate radio frequency energy and, if not installed 
and used in accordance with the instructions, may 
cause harmful interference to radio communica-
tions. However, there is no guarantee that interfer-
ence will not occur in a particular installation. If this 
equipment does cause harmful interference to radio 
or television reception, which can be determined 
by turning the equipment off and on, the user is 
encouraged to try to correct the interference by one 
or more of the following measures:

Reorient or relocate the receiving antenna.

 

-

Increase the separation between the equip-

 

-

ment and the receiver.

Connect the equipment into an outlet on 

 

-

a circuit different from that to which the 
receiver is connected.

Consult the dealer or an experienced radio/

 

-

TV technician for help.

Changes or modifications not expressly 
approved by Mitsubishi could cause harmful 

interference and would void the user’s authority 
to operate this equipment.

Features and specifications described in this owner’s 
guide are subject to change without notice.

Summary of Contents for LDTV146

































































































Reviews: