18
2. TV Menus
For assistance call 1(877) 675-2224
Picture
3 D Mode
Source
Format
Off
Turns off 3D mode for the current input. Restores normal TV operation for an ordi-
nary 2D signal.
Automatic
•
When the TV receives a 3D signal from an HDMI 1.4a-compliant device,
forces
the
TV automatically into 3D mode and selects the correct 3D format.
•
When the TV receives a normal 2D signal, makes the TV automatically exit 3D
mode.
Side-by-Side
Top/bottom
Checkerboard
3D formats supported by the TV
2D+ Depth
When active, generates a simulated 3D image from an ordinary 2D image.
Glasses
Emitter
Internal
Standard,
Reverse, Off
•
For use with the TV’s internal emitters
• Select
the
Off
setting when using an external IR
emitter to prevent IR interference.
Use the
Standard
or
Reverse
setting to synchro-
nizes left/right images to
work with your 3D glasses.
Glasses
Emitter
External
Standard,
Reverse
For use with an external emitter connected to the
TV’s
3D GLASSES EMITTER
jack.
Depth
•
Available only when
Source Format
is set to
Automatic
,
Side by Side
,
Top/
Bottom
, or
2D+ Depth
.
•
Highlight the icon and press
ENTER
to display the adjustment screen.
•
Allows adjustment of the 3D effect from a flatter image to one with more depth.
DLP Link
Standard,
Reverse, Off
•
For use with DLP Link.
• Select
the
Off
setting if you are not using DLP
Link glasses.
Use the
Standard
or
Reverse
setting to synchro-
nizes left/right images to
work with your 3D glasses.
Picture, continued
Notice Concerning Format Compatibility
The Mitsubishi TVs will support the mandatory HDMI
1.4a 3D signals intended for the United States. Spe-
cifically, the TVs will support the 3D signals known as
Frame Packing 1080p@24 Hz and 720p@60 Hz (primar-
ily from Blu-ray players and gaming consoles), Side-
by-Side(Half) 1080p@24/30/60 Hz, 1080i@60 Hz, and
720p@60 Hz, Top-and-Bottom 1080p@24/30/60 Hz
and 720p@60 Hz, and Checkerboard 1080p@60 Hz.
However, there may be some 3D sources that are not
compatible with the TVs. In all cases: (1) 3D sources
must connect to the TVs using the HDMI inputs or via
StreamTV™ Internet Media; and (2) Active Shutter 3D
glasses that match the TV’s internal synchronization
emitter, or Active Shutter 3D glasses with their own
external matching synchronization emitter connected to
the rear of the TV or DLP Link Active Shutter 3D glasses
are required in order to view 3D content.
Summary of Contents for Laservue L75-A96
Page 51: ......
