14
1. Additional TV Features
For assistance call 1(877) 675-2224
Inputs and Outputs, continued
H DMI Cable Categories
HDMI cables are available as Standard and High-Speed
types.
•
High-Speed HDMI Cables.
Blu-ray players, newer
DVD players, video games, 3D content, and set-top
boxes require High-Speed HDMI cables, suitable
for clock frequencies up to 340 MHz or data rates
of up to 10.2 gigabits per second. Use high-speed
cables for 1080p HD signals carrying extended color
encodings (i.e., 30 or more bits, also called Deep
Color). High-Speed HDMI cables are also suitable for
standard HDTV signals.
•
Standard HDMI Cables
. Standard HDMI cables
may be unmarked. They are suitable for standard
HDTV 720p, 1080i, and 1080p signals with 8-bit color
depth. Use Standard HDMI cables for clock fre-
quencies up to 74.25 MHz or data rates of up to 2.23
gigabits per second.
5. DIGITAL AUDIO OUTPUT
This output sends Dolby Digital or PCM digital audio
to your digital A/V surround sound receiver. Incoming
analog audio is converted by the TV to PCM digital audio.
If you have a digital A/V receiver, this is the only audio
connection needed between the TV and your A/V receiver.
6. DVI/PC INPUT
Connect a DVI device to one of the TV’s HDMI inputs
and use this jack to send analog audio to the TV.
7. AVR AUDIO OUTPUT
Sends analog audio of the current program to an
analog A/V surround sound receiver or stereo system.
Digital audio from digital channels and HDMI devices is
converted to analog audio by the TV for output on this
jack. This is the only audio connection needed to the
TV if using an analog A/V receiver or stereo system.
Note:
If connecting headphones, set
Sound > Global >
Analog Audio Out
to
Variable
.
8. L/R (INPUT 1 and INPUT 2 audio)
Analog stereo inputs for use in conjunction with adja-
cent composite or component video jacks.
9. Y/VIDEO (Composite Video)
Analog standard-definition video inputs. Use the adja-
cent
R
and
L
inputs if you wish to send audio to the TV
speakers.
10. Y/VIDEO Pb Pr (Component Video)
Analog video inputs able to accept high-definition video
from a high-definition source device. Use the adja-
cent
R
and
L
inputs if you wish to send audio to the TV
speakers.
11. IR-EXTERNAL CONTROLLER INPUT
Accepts control signals from an external controller
when set up by your professional installer. The control-
ler should send electronic versions of remote control
commands.
12. 3D GL ASSES EMITTER
Use this jack for the special IR emitter supplied with
some 3D glasses. The emitter sends out an infrared
signal that synchronizes your 3D glasses with the screen
display.
13. ANT ( Antenna)
Connect your main antenna or direct cable service
(without a cable box) to
ANT
. The
ANT
input can
receive digital and analog over-the-air channels from
a VHF/UHF antenna or non-scrambled digital/analog
cable source.
Summary of Contents for Laservue L75-A96
Page 51: ......
