2
Introduction
Note
A point to notice
Info.
Supplementary information
Controls and Functions
Front View
EJECT button
Press to remove the cassette.
Cassette Loading Slot
Cassette is inserted in this slot for loading.
REW button
Press to rewind the tape.
STOP button
Press to stop all tape related functions. When pressing while
the tape is stopped or the tape is not loaded, the Counter display
on the fluorescent display will be changed to the clock. The
Counter display will automatically reappear after 5 seconds.
PLAY button
When the VCR is in stop mode, press to playback a previously
recorded tape.
FF button
Press to forward the tape.
REC button
Press this button and PLAY button at the same time to begin
recording. During playback, press to monitor the signal from
S-VIDEO/VIDEO IN and AUDIO IN L/R connector.
PAUSE button
During recording, press to stop the tape movement temporarily.
Press again to continue the recording.
During playback, press to obtain a still picture.
Fluorescent Display
page 4
POWER button
Press to turn the VCR POWER on or off.
Note
• When turning the VCR off during the tape is in operation
(fast forwarding, rewinding, playing or recording, etc.), press
STOP first to stop the tape and then press POWER to turn
off.
EJECT
POWER
MONITOR
CH1
MIX
CH2
PART
OFF
ALL
HiFi
MIX
NORMAL
AUDIO
KEY LOCK
MIC
TRACKING
+
–
PROGRAM
MARK IN
A
B
JOG/ADJUST
SHUTTLE
FWD
REV
AUDIO DUB
MENU
SEARCH
CLEAR
ENTER
FRAME/
FIELD
COUNTER
RESET
REW
FF
STOP
PLAY
PAUSE
REC
Symbol " ": on (power connection to the mains)
Symbol " ": off (power disconnection from the mains)
AUDIO switch
Use to select the audio signal output from the AUDIO OUT
CH-1/L and CH-2/R terminals on the rear panel.
MONITOR switch
Use to select the audio signal output from the MONITOR
connector on the rear panel.
CH-1 : use to select audio signal from AUDIO OUT CH-1/L.
MIX : use to select audio signal from both AUDIO OUT CH-1/
L and CH-2/R.
CH-2 : use to select audio signal from AUDIO OUT CH-2/R.
KEY LOCK switch
Use to lock the VCR into the current mode.
PART : use to lock all buttons except STOP button, REC+PLAY
button, EJECT button, PAUSE button and POWER
button. “
” illuminates on the fluorescent display.
OFF : use to release the lock.
ALL
: use to lock all buttons except POWER button. “
”
illuminates on the fluorescent display.
COUNTER RESET button
Press to reset the counter to “0:00:00”. Also, use to erase the
points memorized by MARK IN A/B buttons.
Note
• Press the button for about 2 seconds.
MIC IN jack
Input jack for a microphone. The audio signal from a
microphone is recorded to the normal audio channel.
MIC level indicator
During recording, illuminates according to the sound level.
AUDIO OUT (CH-1/L)
AUDIO switch
setting
connector
Hi-Fi
MIX
NORMAL
Hi-Fi audio CH-1
Both Hi-Fi audio CH-1
and normal audio
normal audio
AUDIO OUT (CH-2/R)
Hi-Fi audio CH-2
Both Hi-Fi audio CH-2
and normal audio
normal audio
