14
Installation
Note
A point to notice
Info.
Supplementary information
VCR operations can be set through menus. Set MENU1 and MENU2 by the following steps.
1. Press MENU button.
•
Each time you press the button, the display will be switched in the order of <MENU 1>
<MENU 2>
<MENU 3>
<ELAPSED TIME>
exit the menu
<MENU 1>...
Note
•
Press MENU button for about 2 seconds to display the menu.
2. Turn JOG to the left or right to select the desired item.
•
When turned to the right, the cursor moves downward.
•
When turned to the left, the cursor moves upward.
3. Press ENTER button, then the setting item flashes.
4. Turn JOG to the left or right to change the setting.
5. Press ENTER button to set.
6. Press MENU button several times to exit the menu.
Info.
Use of JOG dial for menu setting
• Put a finger to the dimple and turn round and round.
• Turning to the right changes the setting item to forward direction and turning to the left changes
the setting item to backward direction.
• When the setting item is not flashing, turn to the right to move the cursor (
) downwards and
turn to the left to move it upwards.
Menu Settings
<MENU 2>
S-VHS
AUTO
Y-NR
ON
C-NR
ON
Y-ENHANCER
ON
TBC
ON
COLOUR FILTER
OFF
FREEZE MODE
FRAME
Hi-Fi AUDIO
ON
NORMAL AUDIO IN
MIX
<MENU 1>
REC TAPE END
STOP
TAPE END
STOP
TAPE IN
STOP
TAPE LENGTH
E-180
VISS
REC
TIME CODE REC
OFF
TIME DATE DISP.
OFF
FOOT SWITCH
L.E
DIMMER
OFF
<MENU 3>
DAYLIGHT SAVINGS
AUTO
MONTH
01
DAY
01
YEAR
2002
TIME
00:00:00
DAYLIGHT SET
WEEK
MONTH
TIME
ON LST SUN
03
01:00
OFF LST SUN
10
02:00
<ELAPSED TIME>
HEADS
0H
POWER
0H
Press the MENU button
JOG dial
ENTER button
MENU button
Menu Chart
