Mitsubishi Electric GOT SIMPLE Series, User Manual

Page: 30 / 310

28
3 SPECIFICATIONS
3.2 Performance Specifications
3.2
Performance Specifications
The following shows the performance specifications.
Item Specifications
GS2110-WTBD-N GS2107-WTBD-N GS2110-WTBD GS2107-WTBD
Display
section
*1*2
Type TFT color liquid crystal
Screen size 10" 7" 10" 7"
Resolution WVGA: 800 × 480 dots
Display size W222(8.74) × H132.5(5.22)
[mm] (inch) W154(6.06) × H85.9(3.38)
[mm] (inch) W222(8.74) × H132.5(5.22)
[mm] (inch) W154(6.06) × H85.9(3.38)
[mm] (inch)
Display
character 16-dot standard font: 50 characters × 30 rows (two-byte characters)
12-dot standard font: 66 characters × 40 rows (two-byte characters)
Display color 65536 colors
Brightness 32-level adjustment
Backlight
*3
LED-type (no replacement required)
Touch panel
*4
Type Analog-resistive film type
Key size Minimum 2 × 2 dots
*7
(per key)
Number of
points touched
simultaneously Simultaneous 2-point presses prohibited (Only one point can be touched.)
*5
Life 1 million times (operating force 0.98N max.)
Memory C drive Flash memory (Internal) (15MB), for storing project data,
OS Flash memory (Internal) (9MB), for storing project data, OS
Life (Number of write times) 100,000times
Built-in
interface RS-422/485 RS-422/485, 1ch
Transmission speed: 115200/57600/38400/19200/9600/
4800bps
Connector shape: D-sub 9 pins (Female)
Application: For communicating with controllers
Terminating resistor: 330
Ω , 110 Ω , OPEN (Selectable by
the terminating resistor setting switch.)
*9
-
RS-422 - RS-422, 1ch
Transmission speed: 115200/57600/38400/19200/9600/
4800bps
Connector shape: D-sub 9 pins (Female)
Application: For communicating with controllers
Terminating resistor: 330
Ω fixed
RS-232 RS-232, 1ch
Transmission speed: 115200/57600/38400/19200/9600/4800bps
Connector shape: D-sub 9 pins (Male)
Application: For communication with controllers and a bar code reader
For PC connection (Project data read/write, FA transparent function)
Ethernet Data Transfer method: 100BASE-TX, 10BASE-T, 1ch
Connector shape: RJ-45 (modular jack)
Application: For communication with controllers
For PC connection (Project data read/write, FA transparent function)
USB (Device) 1 channel (rear face)
USB version: USB1.1 (Full-Speed 12 Mbps)
Connector shape: Mini-B
Application: For PC connection (Project data read/write, FA transparent function)
SD card Conforms to the SD standard, 1ch
Supported memory card: SDHC memory card, SD memory card
Application: Project data read/write, logging data save
Buzzer output Single tone (LONG/SHORT/OFF adjustable)
Protective structure IP65F (only the front part of the panel)
*6*8
External dimensions W272(10.71) × H214(8.43)
× D56(2.21) [mm] (inch) W206(8.11) × H155(6.11) ×
D50(1.97) [mm] (inch) W272(10.71) × H214(8.43)
× D56(2.21) [mm] (inch) W206(8.11) × H155(6.11) ×
D50(1.97) [mm] (inch)
Panel cutting dimensions W258(10.16) × H200(7.88)
[mm] (inch) W191(7.52) × H137(5.40)
[mm] (inch) W258(10.16) × H200(7.88)
[mm] (inch) W191(7.52) × H137(5.40)
[mm] (inch)
Weight (excluding a fitting) Approx. 1.3 (2.9) [kg] (lb) Approx. 0.9 (2.0) [kg] (lb) Approx. 1.3 (2.9) [kg] (lb) Approx. 0.9 (2.0) [kg] (lb)