manualshive.com logo in svg

Mitsubishi Electric FX3U-ENET, User Manual

The Mitsubishi Electric FX3U-ENET offers seamless connectivity with your automation system. Simplify your installation process with the comprehensive Installation Manual available for free download from our website. This user-friendly manual provides detailed instructions, ensuring optimum performance. Enhance your system's functionality today with the Mitsubishi Electric FX3U-ENET.

Share
Download
background image

A - 7

A - 7

8  COMMUNICATION USING MC PROTOCOL

8-  1 to 8-  4

8.1  Data Communication Function....................................................................................................... 8-  1

8.1.1  Accessing the PLC using MC protocol..................................................................................... 8-  1
8.1.2  How to Read the Control Procedures of the MC Protocol ....................................................... 8-  2
8.1.3  Access Timing on the PLC Side .............................................................................................. 8-  3
8.1.4  PLC setting for performing data communication...................................................................... 8-  4
8.1.5  Precautions on Data Communication ...................................................................................... 8-  4

9  WHEN COMMUNICATING DATA USING THE MC PROTOCOL

9-  1 to 9-40

9.1  Message Formats and Control Procedures ................................................................................... 9-  1

9.1.1  How to read the command reference section .......................................................................... 9-  1
9.1.2  Message format and control procedure ................................................................................... 9-  3
9.1.3  Contents of data designation items.......................................................................................... 9-  7
9.1.4  Character area transmission data............................................................................................ 9-11

9.2  List of Commands and Functions for The MC protocol.................................................................. 9-15
9.3  Device Memory Read/Write ........................................................................................................... 9-16

9.3.1  Commands and device range .................................................................................................. 9-16
9.3.2  Batch read in bit units (command: 00) ..................................................................................... 9-19
9.3.3  Batch write in bit units (command: 02)..................................................................................... 9-21
9.3.4  Test in bit units (random write) (command: 04) ....................................................................... 9-23
9.3.5  Batch read in word units (command: 01) ................................................................................. 9-25
9.3.6  Batch write in word units (command: 03)................................................................................. 9-29
9.3.7  Test in word units (random write) (command: 05) ................................................................... 9-33

9.4  Remote RUN/STOP, PLC model name code read ........................................................................ 9-35

9.4.1  Commands and control contents ............................................................................................. 9-35
9.4.2  Remote RUN (command: 13) / Remote STOP(command: 14)................................................ 9-36
9.4.3  PLC model name read (command: 15).................................................................................... 9-38

9.5  Loopback Test ............................................................................................................................... 9-39

9.5.1  Loopback test (command: 16) ................................................................................................. 9-39

10  USING THE E-MAIL FUNCTION

10-  1 to 10-27

10.1  E-mail Function .......................................................................................................................... 10-  1

10.1.1  E-mail send and reception by the PLC ................................................................................ 10-  1

10.2  Configuration and Environment of the Applicable System......................................................... 10-  3
10.3  Precautions for Using the E-mail Function................................................................................. 10-    4
10.4  E-mail Specifications.................................................................................................................. 10-  6
10.5  Processing Procedure of the E-mail Function............................................................................ 10-  7
10.6  E-mail Settings........................................................................................................................... 10-  8
10.7  Sending/Receiving E-mail (Attached Files) by the PLC............................................................. 10-12

10.7.1  When sending data as an attached file................................................................................ 10-12
10.7.2  When receiving data in an attached file ............................................................................... 10-18
10.7.3  Contents of the attached files .............................................................................................. 10-23

10.8  Sending E-mail (Main Text) by the PLC..................................................................................... 10-25

10.8.1  When sending data as main text of e-mail........................................................................... 10-25

Summary of Contents for FX3U-ENET









































































































































































































































































































Reviews:

No comments

Related manuals for FX3U-ENET

NEC N8403-019 User Manual preview
N8403-019
Brand: NEC Pages: 146
FAAC E124 Manual preview
E124
Brand: FAAC Pages: 32
Samson 3372 User Manual preview
3372
Brand: Samson Pages: 8
Samson 3249 Mounting And Operating Instructions preview
3249
Brand: Samson Pages: 60
Samson 2405 Series Mounting And Operating Instruction preview
2405 Series
Brand: Samson Pages: 40
Broadcast Tools WVRC-4 Installation And Operation Manual preview
WVRC-4
Brand: Broadcast Tools Pages: 39
APV SUPERSEAL 2014 Series Installation, Operation & Maintenance Manual preview
SUPERSEAL 2014 Series
Brand: APV Pages: 20
LEYBOLD SCROLLVAC plus Service Manual preview
SCROLLVAC plus
Brand: LEYBOLD Pages: 12
zeeltronic PDCI-24V User Manual preview
PDCI-24V
Brand: zeeltronic Pages: 13
QD Dynamics Pi HSC505-32 User'S Information Manual preview
Pi HSC505-32
Brand: QD Dynamics Pages: 64
Xylem FLYGT Pareo DCM 711 Installation, Operation And Maintenance Manual preview
FLYGT Pareo DCM 711
Brand: Xylem Pages: 56
Patton SmartNode 5501 User Manual preview
SmartNode 5501
Brand: Patton Pages: 56
Watts Vision BT-A02 RF Description And Application Manual preview
Vision BT-A02 RF
Brand: Watts Pages: 19
SPXFLOW Bilge Pump Control Panel Instruction Manual preview
Bilge Pump Control Panel
Brand: SPXFLOW Pages: 14
BLACKMER AVC Instructions And Parts List preview
AVC
Brand: BLACKMER Pages: 8
S&C Micro-AT Quick Start Programming Manual preview
Micro-AT
Brand: S&C Pages: 12
Quick HT94 Manual Of Installation And Use preview
HT94
Brand: Quick Pages: 16
X-lander Around the World Series Instructions For Use Manual preview
Around the World Series
Brand: X-lander Pages: 41

Brands by name

Popular brands

Load more brands