20
INVERTER SETTING
(3) Operation mode switching method
For the switching method from the external terminal, refer to
the inverter manual (applied)
.
Refer to
page
for a switching method from the network.
CAUTION
⋅
When starting the inverter in network operation mode at powering on or an inverter reset, set a value other than 0 in
Pr. 340
.
(Refer to page 18)
⋅
When setting a value other than 0 in
Pr. 340
, make sure that the initial settings of the inverter are correct.
Switching from the network
Switch to the network operation
mode from the network.
Press of
the PU to light .
Switch to the external
operation mode from
the network.
External operation
Switching from the PU
Press of the
PU to light .
Press of of the PU to light .
Network operation
PU operation
Press of of the PU to light .
Network operation
PU operation
When "0, 1, or 2" is set in Pr. 340
When "10 or 12" is set in Pr. 340
A7NCA.book 20 ページ ２００６年７月３日 月曜日 午前９時４８分
