Product Lineup
Specifications
Examples of
EcoMonitorLight
Applications
External View
Names and
Functions of
Each Part
Connection
Configurations
/Wiring Precautions
Communication
Unit Wiring and
Setting Procedures
Energy measuring
devices
Model Name/
Specifications
Safety
Precautions
Device
Installation
Procedures
Features
Memo
Product Lineup
Specifications
Examples of EcoMonitorLight Applications
External View
Names and Functions of Each Part
Connection Configurations /Wiring Precautions
Communication Unit Wiring and Setting Procedures
Energy measuring devices
Model Name/ Specifications
Safety Precautions
Device Installation Procedures
Features
Memo
30
29
9.Device Installation Procedures
*If the display part protrudes from the plate surface at IEC rail and JIS-compliant form installation,
cut the plate at a point 50 mm or more from door opening/closing support.
Caution
Do not energize when connecting the energy
measuring unit and do not perform live-wire
installation. Doing so can result in electrical
shock, device malfunction, fire and similar
problems.
Do not remove the SD memory card until you have checked that the SD C. LED light has
gone out. Removing the SD memory card while this unit is communicating with the SD
memory card can damage the data in the SD memory card, and result in a malfunction of
this unit and the SD memory card.
Connect optional units to the energy measuring unit.
①
Peel off the blank label affixed to the left side
of the main unit of the energy measuring unit.
Insert the SD memory card into the logging unit.
Remove the SD memory card from the logging unit.
Hold the SD memory card straight when inserting into the SD memory card slot and press in until you hear a click sound.
Press the SD memory card inward until you hear a click sound. The SD memory card automatically pops out.
②
Insert the connector of the optional unit into the connector
of the energy measuring unit to closely attach the unit.
③
Slide the coupling tab (green) on top of the optional
unit to lock the optional unit.
●Panel Cutting Dimensions
●Installation Procedures
The panel cutting dimensions are as shown below.
Panel thickness allowable for installation is 1.6 to 4.0 mm.
The panel cutting dimensions are as shown below.
Panel thickness allowable for installation is 1.6 to 4.0 mm.
Install the screws (M3 X 10) to the installation plate.
Tightening torque: 0.63 N/m
Install to the installation plate using the installation screws
(M3 x 10) and install the board surface installation attachment.
Tightening torque: 0.63 N/m
●Panel Cutting Dimensions
●Installation Procedures
仮写真
仮写真
仮写真
*Tighten the attachment with the screws in an environment with a large amount of vibration.
*The installation screws and attachment fixing screws are packaged with the attachment (sold separately).
Recommended
Installation Screws
Cross-recessed head machine screw with spring
and plain washers JIS B 1188 M3 x 10, Two screws
●Applicable IEC Rail
（35mm）
●Installation
●Removal
●Installation
●Removal
●JIS-Compliant Shape
Installation Plate
Energy Measuring Unit
Optional Units
Common for Logging Unit and CC-Link Communication Unit
SD Memory Card for Logging Unit
IEC Rail Installation (Surface Installation)
JIS-Compliant Dimensions Installation (Front-Surface Installation)
Board Installation
Board Installation (Using Board Surface Installation Attachment (EMU4-PAT))
Hook
Installation Plate
Fitting Spring
Installation Plate
Installation Screws
①
Pull the IEC rail stopper
of the main unit downward.
①
Check that the IEC rail stopper
of the main unit is on the upper side.
①
Press down the fitting spring.
②
Hooks
IEC Rail
③
Push
④
Push the IED rail
stopper upward.
7.3 or more
②
Pull up
①
Press against the main unit
using your hand so that it
does not fall, and pull the
IEC rail stopper downward.
②
Hook the grooves (three
locations) on the upper
part of the main unit
onto the hooks of the
installation plate.
③
Press the main unit downward to that
the fitting spring is inserted into the
groove on the bottom of the main unit.
②
Lightly lift the bottom of
the main unit and pull out
in the reverse order of the
installation procedures.
Main Unit External Shape
Main Unit External Shape
Installation Screws
Installation Plate
Attachment Fixing Screws
Board Surface
Installation Attachment
Blank Label
CAUTION
Summary of Contents for EMU4-BD1-MB
Page 9: ......
