Mitsubishi Electric E Series, Service Handbook

Page: 62 / 170

[
IV
Remote Controller ]
- 53 -
HWE1417B GB
IV Remote Controller [1] Using the Remote Controller (PAR-W21MAA)
<1> Starting and Stopping Operation and
Changing the Operation Mode
To Start Operation
1. Press the ON/OFF (BACK) button .
The power indicator and the display will light up.
To Stop Operation
1. Press the ON/OFF (BACK) button while the unit is in operation.
The power indicator and the display will light off.
The remote controller will remember the last mode and temperature
settings when turned off.
To select the Mode
1. With the power turned on, press the Mode (BACK) button until the
desired mode appears.
• Each press changes the operation mode in the following sequence
(see notes *1 and *2 below):
Heating→Heating ECO→Anti-freeze→Cooling→Back to Heating.
The currently selected mode will appear in the area labeled .
*1 If K07-K08 or K13-K15 is ON (CLOSE), the operation mode except Cooling
mode cannot be changed from the remote controller.
*2 The available modes vary depending on the model.
*3 Refer to section <5> "Function Settings" <5>-2. (2) for how to change the
settings for a specific function.
PAR-W21MAA
ON/OFF TEMP.
MENU
BACK DAY CHECK TEST MONITOR/SET
CLOCK CLEAR
ON/OFF INITIAL SETTING CIR.WATER
˚C
˚C
3
2
4
1 Power
Indicator
Mode (BACK)
button
Set Tempera-
ture buttons
ON/OFF
(BACK)
button
1
1
2
1
1
1
2
2
3
HWE1417B.book 53 ページ ２０１９年７月１６日 火曜日 午後３時４７分