Mitsubishi Electric DT851 User Manual Download

Page: 20 / 44

English

English-19

Connecting to a VCR / Stereo Ampli

You can connect your VCR / stereo ampli

er to your LCD monitor. Refer to your VCR / stereo ampli

er owner's manual for more

information.

Connect the LCD Monitor to a VCR / Stereo Ampli

• To connect the VIDEO IN connector (RCA, BNC or S-VIDEO) on the LCD monitor, use a video cable or S-video cable. Use a

separately available RCA cable or S-video cable.

To connect the AUDIO IN connector (RCA) on the LCD monitor, use an RCA cable.

When connect the RCA or BNC connector, select VIDEO from the INPUT button on the LCD monitor or VIDEO button on the
remote control.

When connect the S-VIDEO connector, select VIDEO<S> from the INPUT button on the LCD monitor or VIDEO(S) button on
the remote control.

• Turn on the LCD monitor and the ampli

er only after all connections have been made.

• Use an RCA cable to connect the AUDIO OUT connector (RCA) on the LCD monitor and the audio input on the ampli

er.

• Do not reverse the audio left and right jacks.
• The AUDIO IN 2 and 3 (both RCA) can be used for audio input. For connection, select [AUDIO1], [AUDIO2], [AUDIO3] from

the AUDIO INPUT button.

• The AUDIO OUT jack outputs sound from the selected Audio input.

Monitor

VCR

To video output

To audio output

To audio input

RCA

LCD monitor (second monitor)

RCA

BNC

Stereo amplifier

RCA

External

speaker

Summary of Contents for DT851













































Search results

Summary of Contents for DT851

Reviews:

Related manuals for DT851

Brands by name

Popular brands

Mitsubishi Electric DT851, User Manual

Search results

Summary of Contents for DT851

Reviews:

Related manuals for DT851

Brands by name

Popular brands