EN-44
Specifications
Type
DLP™ projector
Model
FD730U/FD730U-G
Rated power supply
100 - 240 V AC, 50/60 Hz
Power consumption
4.2 A
During standby: 0.5W (when STANDBY MODE is LOW)
Display Technology
0.65-inch single chip Digital Micromirror Device (DMD)
Pixels: 1920 x 1080 = 2073600 pixels
Colors
16770000 colors
Projection lens
F 2.4-2.8, f = 20.6-30.1 mm
Light source lamp
280 W
Picture size
40–300 inch (Wide) (aspect ratio 16:9)
PC compatibility
Maximum resolution: 1920 x 1080 dots (Compressed in the case of 1600 x 1200 dots)
Panel resolution: 1920 x 1080 dots
Video compatibility
NTSC/NTSC 4.43/PAL (including PAL-M, N)/SECAM/PAL-60
Component Video (DVD/HDTV) (480i, 576i, 480p, 576p, 1080i, 720p, 1080p)
Speaker
10 W mono x 1
S-video input
Luminance signal: 1.0 Vp-p 75 Ω (negative sync.)
Chroma signal: 0.286 Vp-p 75 Ω (burst signal)
Video input
1.0 Vp-p 75 Ω (negative sync.)
Audio input
350 mVrms, 10 kΩ or more
Analog RGB input
RGB: 0.7 Vp-p 75 Ω (negative sync.)
YP
B
P
R
/YC
B
C
R
:
Y: 1.0 Vp-p (negative sync.)
P
B
P
R
/C
B
C
R
: 0.7 Vp-p
HD/CS: TTL level (positive or negative)
VD: TTL level (positive or negative)
HDMI input
HDMI 19-pin
HDMI interface (TMDS single link) (only PCM audio is supported)
Control connector
SERIAL terminal (RS-232C), LAN terminal (RJ-45)
Outside dimensions
345 x 134 x 270 mm (width x height x depth)
Weight
Approx. 4.3 kg
Length of power cord
71 inch (1.8 m)
Temperature, humidity
(performance guaranteed)
+41°F (+5°C) - +95°F (+35°C), 30 - 90%
• The specifications and outside appearance of the projector are subject to change without prior notice.
