9
OCH728A
The main display can be displayed in two different modes: “Full” and “Basic”. The initial setting is “Full”. To switch to the “Basic” mode, change the
setting on the Main display setting. (Refer to operation manual included with remote controller.)
▌
1
Operation mode
▌
2
Preset temperature
▌
3
Clock
Current time appears here.
▌
4
Fan speed
▌
5
Button function guide
Functions of the corresponding buttons appear here.
▌
6
Appears when the ON/OFF operation is centrally controlled.
▌
7
Appears when the operation mode is centrally controlled.
▌
8
Appears when the preset temperature is centrally controlled.
▌
9
Appears when the filter reset function is centrally controlled.
▌
0
Indicates when filter needs maintenance.
▌
1
Room temperature
Current room temperature appears here.
▌
2
Appears when the buttons are locked.
▌
3
Appears when the On/Off timer, Night setback, or Auto-off timer
function is enabled.
appears when the timer is disabled by the centralized control
system.
<Full mode>
* All icons are displayed for explanation.
Fri
Mode
Temp.
Fan
Room
Cool
Set temp.
Auto
<Basic mode>
Fri
Cool
Mode
Temp.
Fan
Set temp.
Auto
2
1
5
6
7
8
9
0
1
3
9
4
)
!
2 3 4 5 6 7 @
2
1
5
▌
4
Appears when the Weekly timer is enabled.
▌
5
Appears while the units are operated in the energy saving mode. (Will
not appear on some models of indoor units)
▌
6
Appears while the outdoor units are operated in the silent mode.
(This indication is not available for CITY MULTI models.)
▌
7
Appears when the built-in thermistor on the remote controller is
activated to monitor the room temperature (
1
).
appears when the thermistor on the indoor unit is activated to
monitor the room temperature.
▌
8
Indicates the vane setting.
▌
9
Indicates the louver setting.
▌
)
Indicates the ventilation setting.
▌
!
Appears when the preset temperature range is restricted.
▌
@
Appears when an energy-saving operation is performed using a “3D i-
See sensor” function. (not available)
▌
#
Centrally controlled
Appears for a certain period of time when a centrally-controlled item is
operated.
▌
$
Preliminary error display
An error code appears during the preliminary error.
Most settings (except ON/OFF, mode, fan speed, temperature) can be
made from the Main menu. (Refer to Page 10.)
Display
4
3
$
#
8
