[
IX
Disassembly Procedure ]
- 39 -
HWE20150
GB
6. Fan and fan motor
Exercise caution when removing heavy parts.
1. Removing
the
filter and the bottom plate
(1) Push down the tab on the filter, and pull out the filter in the
direction of the arrow 1.
(2) Remove the fixing screws on the bottom plate (M) to re-
move it.
Tighten screws to a torque of 1.4 0.2 N·m.
Fig.9
2. Removing the fan casing (bottom half)
(1) Squeeze the tabs on the fan casing to remove it in the di-
rection of arrow 2.
Fig.10
(a) Tab
3. Removing the motor cable
(1) Remove the motor cable threw the rubber bush.
4. Removing the fan motor and the Sirocco fan
(1) Loosen either of the two rubber joint (N) fixing screws.
(2) To remove the Sirocco fans (b) and (c) of PEFY-P36, 48,
54NMAU-E4, loosen only the screw (d) on the bearing
support (P), and remove the other screws on it.
Fig.11
(3) Remove the two motor fixing screws to remove the motor
and the Sirocco fan in the direction of arrow 3.
Tighten screws to a torque of 3.5 0.2 N·m.
Fig.12
(M)
1
1
(a)
2
(P)
(N)
(d)
(c)
(b)
3
