T H E S Y S T E M D R I V E S
2/2
2.
Push the disk gently home until it “clicks” into place. The drive
button will also move outwards slightly.
3.
The system should now be able to access the disk and the
information it may contain. While the system is accessing the
disk, the “drive in use” LED should be lit.
Pressing the button, when the drive is not in use, will eject the
floppy disk. Use only the ‘High Density’ type of floppy disk which
has a formatted capacity of 1.44 Mbytes and is readily identified by
the HD logo.
Using a CD-ROM drive
One of the popular options is the fitting of a CD-ROM drive to a
system. A great deal current software is supplied on this format,
mainly due to the large capacity of the CD-ROM disk.
A CD-ROM drive is available either as an upgrade kit from your
supplier, or may have been pre-installed for you at our factory.
Unless either a second hard drive has been installed, or the existing
hard drive has been given more than one partition, a CD-ROM
drive will usually become drive
D:.
The drive has its own headphone jack, with associated volume level
control, for use in playing audio CD’s, It is also possible if you wish,
EMERGENCY
EJECT HOLE
BUSY
INDICATOR
EJECT
BUTTON
COMPACT
DISC DRAWER
HEADPHONE JACK
AND HEADPHONE LEVEL
