Mitsubishi Electric APRICOT FT4200, Owner'S Handbook Manual

Page: 119 / 124

D i a g n o s t i c c o d e s
15/7
One long and two short beeps . This means that either the video subsystem
is faulty or that a video I/O adapter ROM is not readable.
Two long and two short beeps . The video subsystem cannot be supported
by the main system POST. This can occur when the video subsystem is
replaced or changed on site.
POST codes (continued over)
Code Meaning
0 Default config in use (last 3 boots failed)
101 Timer tick interrupt failure
102 Timer 2 test failure
106 Diskette controller failure
110 System board memory parity error
111 I/O Channel card error
114 Option ROM checksum failure
121 Unexpected hardware type 2 interrupt occurred
129 Internal cache error
151 Real time clock failure
161 Real time clock battery failure
162 CMOS RAM checksum failure
162 Invalid configuration information
163 Time of day not set
164 Memory size does not match
175 Bad EEPROM CRC 1
176 System tampered, covers removed
177 Bad administrator password checksum
178 System tampered
182 EEPROM is not functional
183 Administrator password is needed
184 Bad power-on password checksum
185 Corrupted boot sequence
186 Hardware problem
188 Bad EEPROM CRC2
189 Excessive password attempts
201 Memory error
229 Internal cache error
262 DRAM parity configuration
301 Keyboard/keyboard controller failure
604 Diskette drive failure
605 Diskette unlocked problem
662 Diskette drive configuration
762 Coprocessor configuration
962 Parallel port configuration
1162 Serial port configuration
1762 Fixed disk configuration
1780 Fixed disk 0 failure
1781 Fixed disk 1 failure
1782 Fixed disk 2 failure
1783 Fixed disk 3 failure
1800 PCI- no more IRQ available
1801 PCI- no more room for option ROM
1802 PCI- no more I/O space available