5-1
Owner's Handbook
Move the highlight bar to the Fixed Disk 0 parameter to configure the fixed disk
drive (drive C).
Use the arrow keys to select the value that corresponds to your fixed disk type.
Follow the same steps to set the value for Fixed Disk 1 parameter. Select
None
if you don’t have a second fixed disk.
5.1.4
System Memory
The system detects the total amount of system memory during POST and sets
the values of the memory parameters accordingly. If you install additional
memory, the system automatically adjusts the values to show the new memory
size.
5.1.5
Math Coprocessor
The system CPU already includes a math coprocessor so this parameter shows
Installed.
5.1.6
Video Display
The video display is the monitor on which the operating system prompt appears
when you boot the system. The system detects the video mode of your primary
display and sets the corresponding configuration value. The value may be:
.
Monochrome
.
CGA 40 columns x 25 rows
.
CGA 80 columns x 25 rows
.
Special card (VGA/EGA)
