System Board
2-7
2.2.2
Removing SIMMs
Follow these steps when removing SIMMs:
1.
Press the holding clips on both sides of the SIMM outward to release it.
2.
Press the SIMM downwards at about 45
o
angle.
3.
Pull the SIMM out of the socket.
NOTE:
Always remove the SIMM from the highest bank first.
2.2.3
Reconfiguring the System
Reconfigure the system after installing or removing SIMMs.
Follow these steps to reconfigure the system:
1.
Reboot the system. A memory error message appears, indicating that
the total memory does not match the value stored in CMOS.
2.
Press Ctrl-Alt-Esc to run Setup.
A warning message indicating a wrong memory configuration appears.
3.
Press Esc twice to exit Setup and reboot the system.
The system boots with the new memory configuration.