6-4
Owner's Handbook
CONFIGURE COMPUTER
This selection contains the following submenu:
Configure Computer
Copy configuration (CFG) files
Configure computer - basic method
Configure computer - advanced method
Return to the main menu
The options in this submenu are discussed in the following sections.
SET DATE AND TIME
This selection allows you to set your computer date and time. Once you set
the date and time, your computer will keep track of it, even when the power is
turned off.
EXIT FROM THIS UTILITY
This selection exits the utility. The system will reboot. If you do not have an
operating system installed on your fixed disk, replace the system utilities
diskette in the diskette drive with an operating system diskette.
6.3.3
Configuring the Computer
This section describes the first two selections in the submenu under the
CONFIGURE COMPUTER
selection in the main menu.
When you configure your system with the ECU, you would basically do the
following:
1.
Before you add boards or options, copy the configuration (CFG) file
(contained in a diskette provided by the board manufacturer) to the ECU.
.
Select
CONFIGURE COMPUTER
on the main menu.
