Mitsubishi Electric AJ65VBTCU-68DAVN, User Manual

Page: 42 / 112

4 - 1 4 - 1
MELSEC-A
4 SETUP AND PREPARATION BEFORE OPERATION
4 SETUP AND PREPARATION BEFORE OPERATION
4.1 Pre-Operation Procedure
This section explains the preparatory procedure for operating the AJ65VBTCU-
68DAVN.
Start data link.
Make offset/gain setting?
Offset/gain setting (Refer to Section 4.5.)
END
No
Yes
Create a program.
Create a program. (Refer to Chapter 5.)
START
Create a program.
Mode select switch setting
(refer to Section 4.3, Section 4.4)
4.2 Precautions When Handling
The precautions when handling the AJ65VBTCU-68DAVN are described below:
CAUTION
Do not touch any terminal while power is on. Doing so may cause malfunction.
Prevent foreign matter such as dust or wire chips from entering the module.
Such foreign matter can cause a fire, failure, or malfunction.
Do not disassemble or modify the modules.
Doing so may cause failure, malfunction, injury, or a fire.
Do not directly touch any conductive part of the module.
Doing so can cause malfunction or failure of the module.
Do not drop or apply strong shock to the module.
Doing so may damage the module.
Tighten the terminal screw within the specified torque range.
Undertightening can cause short circuit or malfunction.
Overtightening can damage the screw and/or module, resulting in drop, short circuit,
or malfunction.
4