EN-6
MENU
EXIT
(2)
(3)
(1)
Parts Name and Functions
(1) POWER button ( )
Switches the power on/off.
(2) Buttons for menu settings
These buttons cannot be used.
(3) Remote control sensor and power lamp
Receives the signal from the remote control (when using the
optional wireless remote control). During start-up, it will blink
green. Glows red when the LCD is in stand-by mode and
glows green when the monitor is in active. When the LCD is
in power save mode, it will glow both green and red. In the
case of where a failure is detected, it will blink red. (Refer to
page 11.)
Front panel
