Mitsubishi Daiya SRK20HB, User Manual, Page: 9 / 20

– 8 –
Aim the remote control at the air conditioner
Press the ON/OFF button
When the unit is not in AUTO mode:
Press MODE button.
Move the [ ¡ mark] to the (Auto) position.
To stop: Press the ON/OFF button.
AUTO mode can be
operated by simply pressing
the ON/OFF button.
• If you don't want the AUTO mode programme, change to
HEAT, DRY or COOL instead of AUTO.
Page 9
Temperature adjustment during AUTO
Air temperature adjustment is possible even during automatic operation. There are 6 levels of adjustment possible with the button or the button.
1
AUTO mode operation procedure
■
Automatically selects the operation mode (HEAT, DRY, COOL) depending on the room temperature when switched on.
2
CONT
ON OFF TIMER
FAN SPEED ON/OFF MODE
TEMP AIR FLOW
SET TIMER TIMER
ACL
AUTO
HI
MED
LO
+
–
Air flow direction adjustment
procedure
Page 9
NOTE
Air is not blowing out during the operation.
Page 16
CONT
ON OFF TIMER
FAN SPEED ON/OFF MODE
TEMP AIR FLOW
SET TIMER TIMER
ACL
AUTO
HI
MED
LO
+
–
WARM
Press the button.
COOL
Press the button.
1
When a change in temperature is desired.
Press the or button
■
Each time the button is pushed, the switch over occurs in the following order –6
→
–5
→
............ –1
→
±0
→
+1 ............ +6.
When +6 is indicatored, even if the button is pushed, the indicator does not change.
■
Each time the button is pushed, the switch over occurs in the following order +6
→
+5
→
............ +1
→
±0
→
–1 ............ –6.
When –6 is indicatored, even if the button is pushed, the indicator does not change.
P.1-18/E 04.10.19, 10:26 AM 8