Mitsubishi Daiya SRC25GZ-L1, User Manual, Page: 20 / 50

20
SRK-GZ
¡
Hot keep M mode [During HI POWER operation (for 15 min.)]
S
SRK502Z-L
(iii) Continuous mode operation (Temperature setting button on remote controller: Continuous)
Model SRK25GZ-L1 SRK35GZ-L1 SRK502Z-L
Item AUTO HI MED LO AUTO HI MED LO AUTO HI MED LO
Inverter frequency 104Hz 98Hz 50Hz 98Hz 94Hz 58Hz 144rps 110rps 50rps
Indoor fan 6th speed 5th speed 4th speed 7th speed 5th speed 3rd speed 8th speed 7th speed 5th speed
Outdoor fan ON ON 5th speed 4th speed 2nd speed
Notes (1) In the continuous mode, the continuous heating operation is performed without adjustment of room temperature.
(2) Protective functions will be operated with priority even during the continuous mode operation.
(iv) Hot keep operation
If the hot keep operation is selected during the heating operation, the indoor blower is controlled based on the temperature
of the indoor unit heat exchanger (detected with Th2, indoor unit heat exchanger sensor) to prevent blowing of cool
wind.
¡
Normal mode (Normal heating operation, operation after HI POWER completion)
¡
Values of A, B
A B
At 0 Hz command 22 25
Other than 0 Hz
17 19
command
Indoor heat exchanger temp. (˚C)
1st speed
2nd speed
3rd speed
4th speed
5th speed
6th speed
7th speed
¡
Normal mode (Normal heating operation, operation after HI POWER completion)
Indoor heat exchanger temp. (˚C)
¡
Values of A, B
A B
At 0 Hz command 22 25
Other than 0 Hz
17 19
command
S
SRK25, 35GZ-L1
a b 27.5 28 29.5 31.5 34 36 37.5 39 40
1st speed
2nd speed
3rd speed
4th speed
5th speed
6th speed
7th speed
8th speed
OFF
Indoor fan
Indoor fan
Note (1) Refer to the table shown above
right for the values A and B.
Note (1) Refer to the table
shown above right for
the values A and B.
Note (1) Refer to the table shown above
right for the values A and B.
¡
Hot keep M mode [During HI POWER operation (for 15 min.)]
Indoor heat exchanger temp. (˚C)
a b 29 31 32 34 38 42 50
1st speed
2nd speed
3rd speed
4th speed
5th speed
6th speed
7th speed
8th speed
OFF
Indoor fan
Note (1) Refer to the table shown above
right for the values A and B.
Indoor heat exchanger temp. (˚C)
1st speed
Indoor fan
2nd speed
3rd speed
4th speed
5th speed
6th speed
7th speed