2
◆ CAD with Dongle Key
Make sure to remove Dongle key when you are using the prototyping machine.
Connection error may occur and prototyping machine may be unable to use.
◆ Tools and RPM
For processing, set the RPM to 30～40. The unit in the software is x 1000RPM.
To drill 0.3～0.4mm size holes, set the Lower2 3～4mm/sec.
IMPORTANT
To drill 0.3～0.4mm size holes, go to
CAM Pref.
→
Board Maker
and set
the
Lower2
3～4mm/sec. After setting the Lower2 speed slower, make sure
to set
Drill Wait
and
Before Cutting
longer than the default setting. If
not, there is a possibility of spindle head moving too early before the
drilling is completely penetrated.
◆ Transportation
Since the Auto Lab precision machine, use the container box which was used
for shipping. For long distant transportation using carrier, make sure to
select carrier with great handle care with the transportation.
Do not apply any force to the shaft, lead screw, spindle head while
transportation. It could result to have the accuracy to drop.
◆ Spindle Motor Cleaning
Note that spindle motor and collet are ultra-precision component. In order
to keep the machine performance well, daily checkup and cleaning is necessary.
Spindle motor may result to malfunction when dust or debris are caught between
tool and collet, decreasing the holding power of the tools. Make sure to check
and clean the spindle motor before using.
◆ Warranty
The term of warranty for PCB Prototyping Machine is 1 year with the intended
use. Note that spindle motor and consumable supplies are not included in the
warranty. Also note that even within the warranty period, below circumstances
will be considered as charged repair. Improper use, inappropriate assembly,
damage/breakage by carelessness, natural disaster, abrasion, modification,
use of non-genuine components/parts, use in undesignated voltage. Please
operate with great care when you are using the machine without any training.
