1
・Precautions
◆ Intended Use
The intended use of the PCB Prototyping Machine is to process PCB by milling,
drilling and routing.
Any other uses are strongly prohibited
.
◆ While Processing
Keep away from the machine especially the spindle head while processing
.
Spindle head is constantly moving. Be sure to keep away and not to get your
caught in the machine. Make sure to wear eye protective gear/goggle while
processing.
◆ Power Voltage
The allowable voltage for FP-21T is
85Ｖ～264Ｖ
.If the voltage of your
region is out of range, be sure to use voltage regulator.
◆ Working Area
The working area of FP-21T is
350mm x 250mm
. Be sure to process within the
working area of Auto Lab.
◆ Dry Run and Milling Speed
Below is the optimal speed for Auto Lab.
Dry Run ‥‥ 20～30mm/sec
Milling Speed ‥‥ 12～18mm/sec
Routing Speed ‥‥ 1～ 2mm/sec
If the processing speed is too fast during processing or manual operation,
step-out could occur to the machine.
◆ Milling/Drill/Routing Tool Settings
The machine will process with the settings in
CAM Pref.
→
Milling
･
Drill
･
Routing
. If the parameter in the setting is missing or unintended value, there
is a possibility of tools breaking or processing error occurring. Be sure
to check the parameter in the settings.
◆ Vacuum Cleaner
While processing, if the dust from the PCB piles up, not only the processing
quality is affected by it, there also is a chance of spindle motor
malfunction. Be sure to use Vacuum Cleaner while processing.
