background image

650DX / 750DX Hedgetrimmer

7

Original Instructions Version June 16

650DX+/750DX+_080616

Improper handling can cause accidents which may in turn lead to serious injury or death. For this 
reason, you should always be careful to adhere to the following instructions when using your 
hedgetrimmer. Never hold the hedge trimmer in a way in which the blades are pointing towards 
someone else. 

Never allow the blades to come into contact with your body.

Always turn off the engine before adjusting the hedgetrimmer, removing branches which have 
become stuck in the blades, or at any other time when coming into close proximity with the 
blades.

Always wear thick work gloves when adjusting the hedgetrimmer.

Always place the blade cover provided over the blades when not in use.

Falling branches may fall onto the operator’s body or head, resulting in injuries, scratches and 
cuts, and for this reason you should always wear a helmet when operating the hedgetrimmer.

Safe Handling of Fuel

The engine of the hedge trimmer is designed to run on a two-stroke oil/fuel mixture. This fuel 
is highly flammable, never store cans of fuel or refill the fuel tank in any place where there is a 
source of heat or fire which might ignite the fuel. 

Do not smoke whilst operating the hedge trimmer or refilling, keep lit cigarettes away from the 
hedge trimmer at all times.

When refilling the fuel tank always stop the engine first and carefully make sure that there are no 
sparks or open flames anywhere nearby before refuelling.

If any fuel spillage occurs during refuelling, use a dry rag to wipe any fuel which has been spilled 
onto the hedgetrimmer before starting the engine.

After refuelling, screw the fuel cap back tightly onto the fuel tank and carry the hedgetrimmer to a 
spot 5 metres or more away from where it was refuelled before starting the engine.

Summary of Contents for 650DX Premium+





































Reviews: