650DX / 750DX Hedgetrimmer
16
Original Instructions Version June 16
650DX+/750DX+_080616
HORIZONTAL CUT:
In order to get the best cutting results, slightly tilt the blade 5 to 10° towards the cutting direction.
Cut slowly, especially when cutting thick hedges.
The hedgetrimmer must only be used to trim hedges or small bushes. It is not to cut
other types of material. Do not use the hedgetrimmer as a lever to lift, move or break
objects.
Avoid cutting thick branches, which will damage the blades and shorten the life of the
drive system. Always keep your body to the carburettor side of your hedgetrimmer, never on the
muffler side.
Maintenance
IMPORTANT
After every use, check that all nuts, bolts and screws are securely fastened and tighten if
necessary.
In the event of an accident, breakdown or blockage, ensure the engine is turned off before any
work is carried out to rectify this.
Make sure the engine has stopped and is cool before performing any service to the machine.
Contact with a moving cutting head or hot muffler may result in a personal injury.
