background image

650DX / 750DX Hedgetrimmer

4

Original Instructions Version June 16

650DX+/750DX+_080616

Taking Care of Warning Labels

 

 
Always keep warning labels clean and free of scratches, which might make them illegible or 
difficult to read. If the warning labels provided with your hedgetrimmer become damaged, peel   
off, or otherwise become illegible or difficult to read, order new labels from the authorised  
servicing dealer and replace the damaged labels. When applying new labels, first wipe away any   
dirt and dry the surface before applying the new label in the same place as the original label. 
 
 

Explanation of Symbols on the Machine

 

For safe operation and maintenance, symbols are carved in relief on the machine:

• 

  FUEL 

TANK

                         

Fuel tank 2 stroke mix

                          

Position: Fuel cap

 
 

              CHOKE OPERATION

                         

Starting mode when the engine is hot (choke off).

                         

Position: Air cleaner cover.

 

                 Starting mode when the engine is cold (choke on).

                         

 Position: Air cleaner cover.

 

 

Safety Precautions

 

 
Introduction

Read this Owner/Operator Manual carefully. Be sure you understand how to operate this 
hedgetrimmer properly before you use it. Failure to do so could result in serious injury. 

Summary of Contents for 650DX Premium+





































Reviews: