Mitox 260B, Operator'S Manual

Page: 15 / 26

260B Blower / 280BV Blower Vacuum
15
Original Instructions Version July 12
Hot Engine Starting Procedure
Set the ignition switch to the ON position .
Pull the starter rope until the engine starts.
If the engine does not start after 5 pulls, use the cold start procedure.
Overchoking
Should the engine become flooded due to overchoking, turn the ignition switch off, unscrew the spark plug,
wipe it dry or replace.
Stopping the Engine
Set the engine to idling by releasing the throttle lever.
Set the ignition switch to the off position OFF.
If the engine fails to stop, set the choke lever to the closed position to stall the engine; do not use the
machine until the ignition switch is repaired.